Configuracion de VLANS

Referente a las entradas que he hecho en mi blog anabantha-kris.blogspot.com, decidi copiar las que he realizado, y esta configuracion de VLANs es una de estas, el cual la configuracion fue hecha en el packet tracert con tres (3) VLANS, y cada VLAN con un Trunk (Es un puerto que tiene la capacidad de comunicarse con todas las Vlans); El cual se pueda conectar a un dispositivo o un host que necesite estar intercomunicado con las Vlans.

CONFIGURACION DE VLANS

1 VLAN

Switch>
Switch>enable
Switch#configure terminal
Enter configuration commands, one per line. End with CNTL/Z.
Switch(config)#vlan 300
Switch(config-vlan)#exit
Switch(config)#interface fastethernet 0/4
Switch(config-if)#switchport access vlan 300
Switch(config-if)#exit
Switch(config)#interface fastethernet 0/5
Switch(config-if)#switchport access vlan 300
Switch(config-if)#exit
Switch(config)#exit
%SYS-5-CONFIG_I: Configured from console by console
Switch#enable
Switch#configure terminal
Enter configuration commands, one per line. End with CNTL/Z.
Switch(config)#vlan 350
Switch(config-vlan)#exit
Switch(config)#interface fastethernet 0/2
Switch(config-if)#switchport access vlan 350
Switch(config-if)#exit
Switch(config)#interface fastethernet 0/3
Switch(config-if)#switchport access vlan 350
Switch(config-if)#exit
Switch(config)#exit
Switch# wr
Destination filename [startup-config]?
Building configuration...
[OK]
Switch#
Switch#

TRUNK
Switch#enable
Switch#configure terminal
Enter configuration commands, one per line. End with CNTL/Z.
Switch(config)#interface fastethernet 0/6
Switch(config-if)#switchport mode trunk
Switch(config-if)#exit

2VLAN

Switch>
Switch>enable
Switch#configure terminal
Enter configuration commands, one per line. End with CNTL/Z.
Switch(config)#vlan 400
Switch(config-vlan)#exit
Switch(config)#interface fastethernet 0/4
Switch(config-if)#switchport access vlan 400
Switch(config-if)#exit
Switch(config)#interface fastethernet 0/5
Switch(config-if)#switchport access vlan 400
Switch(config-if)#exit
Switch(config)#exit
%SYS-5-CONFIG_I: Configured from console by console
Switch#enable
Switch#configure terminal
Enter configuration commands, one per line. End with CNTL/Z.
Switch(config)#vlan 450
Switch(config-vlan)#exi
Switch(config)#interface fastethernet 0/2
Switch(config-if)#switchport access vlan 450
Switch(config-if)#exit
Switch(config)#interface fastethernet 0/3
Switch(config-if)#switchport access vlan 450
Switch(config-if)#exit
Switch(config)#exit
%SYS-5-CONFIG_I: Configured from console by console
Switch#wr
Destination filename [startup-config]?
Building configuration...
[OK]
Switch#
Switch#

TRUNK
Switch#enable
Switch#configure terminal
Enter configuration commands, one per line. End with CNTL/Z.
Switch(config)#interface fastethernet 0/6
Switch(config-if)#switchport mode trunk
Switch(config-if)#exit



3VLAN - TRUNK

Switch>
Switch>enable
Switch#configure terminal
Enter configuration commands, one per line. End with CNTL/Z.
Switch(config)#vlan 500
Switch(config-vlan)#exit
Switch(config)#interface fastethernet 0/3
Switch(config-if)#switchport access vlan 500
Switch(config-if)#exit
Switch(config)#interface fastethernet 0/4
Switch(config-if)#switchport access vlan 500
Switch(config-if)#exit
Switch(config)#interface fastethernet 0/2
Switch(config-if)#switchport mode trunk
Switch(config-if)#exit